Green Pumpkin Tube — Orange Skirt

Tube · 2 parts

Steps

1. 1

   Install Tube Spline 95208 in Do-It Skirt Mold 95209. Do not use a tube insert in the skirt mold.

2. 2

   Shoot the orange skirt and let the plastisol set enough to hold its shape.

3. 3

   Remove the loaded spline from the skirt mold, leaving the orange skirt on the spline. Trim the sprue without disturbing the skirt.

4. 4

   Fit the tube insert required for Do-It’s 3.5-inch Tube mold (9519): use the 1 1/4-inch standard insert or the 1-inch T-Rig insert for the thicker-headed T-Rig option.

5. 5

   Transfer the loaded spline and selected insert into the 3.5-inch Tube mold and seat the assembly fully.

6. 6

   Close the mold and shoot the green-pumpkin plastisol to form the body and bond it to the orange skirt.

7. 7

   Let the completed tube cool sufficiently, then remove it from the insert and spline.

8. 8

   Inspect the first bait for alignment, complete fill, cavity depth, and a sound body-to-skirt bond before running the batch.

A light film of worm oil or softener on the tube insert can help release the finished bait, but keep it off the body-to-skirt bonding area.

LureWrightPrecision materials for lure makers

Green Pumpkin Tube — Orange Skirt Tube · 2 parts Body6 oz · Medium blend Green Pumpkin Black Flake Shoot the green-pumpkin plastisol around the orange skirt while it remains on Tube Spline 95208 with the selected 3.5-inch tube insert installed. Medium base Shoot at 330°F Mold 3.5" Tube (9519) — 1 1/4" insert or 1" T-Rig insert Do-It Make Green Pumpkin Black Flake · per 8 oz Crystal Inject 8 oz Crystal Color Green Pumpkin 20 drops Crystal Spark Black .015 1/4 tsp Skirt2 oz · Soft blend Orange Shoot the orange skirt on Tube Spline 95208, remove the loaded spline from the skirt mold, trim the sprue, and keep the skirt on the spline for transfer. Soft base Shoot at 330°F Mold Skirt Mold (95209) with Tube Spline (95208) Do-It Make Orange · per 8 oz Crystal Inject Medium 8 oz Crystal Color Orange 20 drops Steps 1.Install Tube Spline 95208 in Do-It Skirt Mold 95209. Do not use a tube insert in the skirt mold. 2.Shoot the orange skirt and let the plastisol set enough to hold its shape. 3.Remove the loaded spline from the skirt mold, leaving the orange skirt on the spline. Trim the sprue without disturbing the skirt. 4.Fit the tube insert required for Do-It’s 3.5-inch Tube mold (9519): use the 1 1/4-inch standard insert or the 1-inch T-Rig insert for the thicker-headed T-Rig option. 5.Transfer the loaded spline and selected insert into the 3.5-inch Tube mold and seat the assembly fully. 6.Close the mold and shoot the green-pumpkin plastisol to form the body and bond it to the orange skirt. 7.Let the completed tube cool sufficiently, then remove it from the insert and spline. 8.Inspect the first bait for alignment, complete fill, cavity depth, and a sound body-to-skirt bond before running the batch. A light film of worm oil or softener on the tube insert can help release the finished bait, but keep it off the body-to-skirt bonding area.