Motor Oil Ribbon Tail — Pearl Tail

Worm · 2 parts

Steps

1. 1

   Heat the Motor Oil and Pearl Shad plastisol through full cure, then cool both into the listed 330°F shooting range.

2. 2

   Shoot the Pearl Shad ribbon tails in Do-It tail mold 95017 at 330°F. Let them set fully, then demold them.

3. 3

   Place each finished tail into the matching cavity of Do-It worm mold 95221 and seat it fully with the joint straight.

4. 4

   Shoot the Motor Oil body at 330°F around the seated tails. Hold pressure briefly, cool, demold, and inspect the tail bond.

Keep each finished tail seated squarely in the full mold before injecting the body. Inspect the first pair for a straight joint, complete fill, and a sound bond.

LureWrightPrecision materials for lure makers

Motor Oil Ribbon Tail — Pearl Tail Worm · 2 parts Body6 oz · Medium blend Motor Oil Shoot the body around the finished pearl tail placed in the full worm mold. Medium base Shoot at 330°F Mold 4.75" Ribbon Tail Worm — 2 Cavity (95221) Do-It Make Motor Oil · per 8 oz Crystal Inject 8 oz Crystal Color Motor Oil 16 drops Ribbon Tail2 oz · Soft blend Pearl Shad Shoot and fully set the pearl ribbon tails before transferring them to the worm mold. Soft base Shoot at 330°F Mold 4.75" Ribbon Tail Tail — 2 Cavity (95017) Do-It Make Pearl Shad · per 8 oz Crystal Inject 8 oz Crystal Color White 12 drops Crystal Shift Pearl 0.15 g Steps 1.Heat the Motor Oil and Pearl Shad plastisol through full cure, then cool both into the listed 330°F shooting range. 2.Shoot the Pearl Shad ribbon tails in Do-It tail mold 95017 at 330°F. Let them set fully, then demold them. 3.Place each finished tail into the matching cavity of Do-It worm mold 95221 and seat it fully with the joint straight. 4.Shoot the Motor Oil body at 330°F around the seated tails. Hold pressure briefly, cool, demold, and inspect the tail bond. Keep each finished tail seated squarely in the full mold before injecting the body. Inspect the first pair for a straight joint, complete fill, and a sound bond.