LureWrightMotor Oil CTMP
Creature · 1 part
Body · 8 oz
- Color — Use a soft blend to free the twenty pairs of legs; inject smoothly so the fine appendages fill without excess flash.Motor Oil
- BaseSoft
- Shoot at330°F
- MoldUltra Molds · CTMP 4.25" — 3 cavity
Soft blendSuits finesse worms, floating shaky-head worms, and small straight-tail minnows.
Steps
- 1
Preheat the mold, inject the Motor Oil plastisol at 330°F, and maintain light pressure long enough to pack the leg details.
Heat the plastisol through full cure before cooling into the listed shooting range. Open the mold only after the fine legs can release without stretching; inspect the first cavity set for short fills.
 LureWrightPrecision materials for lure makers |
|---|
Motor Oil CTMPCreature · 1 part Body8 oz · Soft blend| Motor Oil | Use a soft blend to free the twenty pairs of legs; inject smoothly so the fine appendages fill without excess flash. | Soft base | | Shoot at | | 330°F | | Mold | CTMP 4.25" — 3 cavity | Ultra Molds |
Make Motor Oil · per 8 oz| Crystal Inject | | 8 oz | | Crystal Color | Motor Oil | 16 drops |
Steps- 1.Preheat the mold, inject the Motor Oil plastisol at 330°F, and maintain light pressure long enough to pack the leg details.
Heat the plastisol through full cure before cooling into the listed shooting range. Open the mold only after the fine legs can release without stretching; inspect the first cavity set for short fills. |