LureWrightJunebug Ribbon Tail — Chartreuse Tail
Worm · 2 parts
Body · 6 oz
- Color — Shoot the body around the finished chartreuse tail placed in the full worm mold.Junebug
- BaseMedium
- Shoot at330°F
- MoldDo-It · 4.75" Ribbon Tail Worm — 2 Cavity (95221)
Medium blendSuits standard plastic worms, standard crawfish, grubs, and versatile swimbaits.
Ribbon Tail · 2 oz
- Color — Shoot and fully set the chartreuse ribbon tails before transferring them to the worm mold.Chartreuse Pepper
- BaseSoft
- Shoot at330°F
- Mold4.75" Ribbon Tail Tail — 2 Cavity (95017)
Soft blendSuits finesse worms, floating shaky-head worms, and small straight-tail minnows.
Steps
- 1
Heat the Junebug and Chartreuse Pepper plastisol through full cure, then cool both into the listed 330°F shooting range.
- 2
Shoot the Chartreuse Pepper ribbon tails in Do-It tail mold 95017 at 330°F. Let them set fully, then demold them.
- 3
Place each finished tail into the matching cavity of Do-It worm mold 95221 and seat it fully with the joint straight.
- 4
Shoot the Junebug body at 330°F around the seated tails. Hold pressure briefly, cool, demold, and inspect the tail bond.
Keep each finished tail seated squarely in the full mold before injecting the body. Inspect the first pair for a straight joint, complete fill, and a sound bond.
 LureWrightPrecision materials for lure makers |
|---|
Junebug Ribbon Tail — Chartreuse TailWorm · 2 parts Body6 oz · Medium blend| Junebug | Shoot the body around the finished chartreuse tail placed in the full worm mold. | Medium base | | Shoot at | | 330°F | | Mold | 4.75" Ribbon Tail Worm — 2 Cavity (95221) | Do-It |
Make Junebug · per 8 oz| Crystal Inject | | 8 oz | | Crystal Color | Junebug | 20 drops | | Crystal Spark | Red .015 | 1/4 tsp |
Ribbon Tail2 oz · Soft blend| Chartreuse Pepper | Shoot and fully set the chartreuse ribbon tails before transferring them to the worm mold. | Soft base | | Shoot at | | 330°F | | Mold | 4.75" Ribbon Tail Tail — 2 Cavity (95017) | |
Make Chartreuse Pepper · per 8 oz| Crystal Inject | | 8 oz | | Crystal Color | Chartreuse | 16 drops | | Crystal Spark | Black .008 | 1/4 tsp |
Steps- 1.Heat the Junebug and Chartreuse Pepper plastisol through full cure, then cool both into the listed 330°F shooting range.
- 2.Shoot the Chartreuse Pepper ribbon tails in Do-It tail mold 95017 at 330°F. Let them set fully, then demold them.
- 3.Place each finished tail into the matching cavity of Do-It worm mold 95221 and seat it fully with the joint straight.
- 4.Shoot the Junebug body at 330°F around the seated tails. Hold pressure briefly, cool, demold, and inspect the tail bond.
Keep each finished tail seated squarely in the full mold before injecting the body. Inspect the first pair for a straight joint, complete fill, and a sound bond. |