Green Pumpkin Red Ecto-Craw

Craw · 1 part

Steps

1. 1

   Preheat the two-cavity mold evenly and prepare the fully heated Green Pumpkin Red Craw plastisol.

2. 2

   Let the plastisol cool into an appropriate shooting range, then load the injector.

3. 3

   Inject with a steady push and hold brief pressure to fill the compact body and both claws.

4. 4

   Allow a full set, demold carefully, and inspect both claw tips and the body for dents or trapped air.

Use a steady injection and brief hold pressure to fill the compact body and both claws. Let the bait cool enough to support the thin claw sections before demolding. Inspect the first shot for complete claw tips, dimples, and trapped air; correct fill by adjusting mold warmth, shooting range, or hold pressure gradually. No exact shooting temperature is treated as validated here.

LureWrightPrecision materials for lure makers

Green Pumpkin Red Ecto-Craw Craw · 1 part Body8 oz · Medium blend Green Pumpkin Red Craw Compact single-color craw with the mold’s high-action claw profile. Medium base Shoot at 330°F Mold 3.4-inch Ecto-Craw, 2-cavity (ECTO-3.4-2) Angling AI Make Green Pumpkin Red Craw · per 8 oz Crystal Inject 8 oz Crystal Color Green Pumpkin 20 drops Crystal Spark Red .015 1/4 tsp Steps 1.Preheat the two-cavity mold evenly and prepare the fully heated Green Pumpkin Red Craw plastisol. 2.Let the plastisol cool into an appropriate shooting range, then load the injector. 3.Inject with a steady push and hold brief pressure to fill the compact body and both claws. 4.Allow a full set, demold carefully, and inspect both claw tips and the body for dents or trapped air. Use a steady injection and brief hold pressure to fill the compact body and both claws. Let the bait cool enough to support the thin claw sections before demolding. Inspect the first shot for complete claw tips, dimples, and trapped air; correct fill by adjusting mold warmth, shooting range, or hold pressure gradually. No exact shooting temperature is treated as validated here.