LureWrightBlack Blue Ribbon Tail — Orange Tail
Worm · 2 parts
Body · 6 oz
- Color — Shoot the body around the finished orange tail placed in the full worm mold.Black Blue Flake
- BaseMedium
- Shoot at330°F
- MoldDo-It · 4.75" Ribbon Tail Worm — 2 Cavity (95221)
Medium blendSuits standard plastic worms, standard crawfish, grubs, and versatile swimbaits.
Ribbon Tail · 2 oz
- Color — Shoot and fully set the orange ribbon tails before transferring them to the worm mold.Orange
- BaseSoft
- Shoot at330°F
- MoldDo-It · 4.75" Ribbon Tail Tail — 2 Cavity (95017)
Soft blendSuits finesse worms, floating shaky-head worms, and small straight-tail minnows.
Steps
- 1
Heat the Black Blue Flake and Orange plastisol through full cure, then cool both into the listed 330°F shooting range.
- 2
Shoot the Orange ribbon tails in Do-It tail mold 95017 at 330°F. Let them set fully, then demold them.
- 3
Place each finished tail into the matching cavity of Do-It worm mold 95221 and seat it fully with the joint straight.
- 4
Shoot the Black Blue Flake body at 330°F around the seated tails. Hold pressure briefly, cool, demold, and inspect the tail bond.
Keep each finished tail seated squarely in the full mold before injecting the body. Inspect the first pair for a straight joint, complete fill, and a sound bond.
 LureWrightPrecision materials for lure makers |
|---|
Black Blue Ribbon Tail — Orange TailWorm · 2 parts Body6 oz · Medium blend| Black Blue Flake | Shoot the body around the finished orange tail placed in the full worm mold. | Medium base | | Shoot at | | 330°F | | Mold | 4.75" Ribbon Tail Worm — 2 Cavity (95221) | Do-It |
Make Black Blue Flake · per 8 oz| Crystal Inject | | 8 oz | | Crystal Color | Black | 20 drops | | Crystal Spark | Blue .015 | 1/4 tsp |
Ribbon Tail2 oz · Soft blend| Orange | Shoot and fully set the orange ribbon tails before transferring them to the worm mold. | Soft base | | Shoot at | | 330°F | | Mold | 4.75" Ribbon Tail Tail — 2 Cavity (95017) | Do-It |
Make Orange · per 8 oz| Crystal Inject | Medium | 8 oz | | Crystal Color | Orange | 20 drops |
Steps- 1.Heat the Black Blue Flake and Orange plastisol through full cure, then cool both into the listed 330°F shooting range.
- 2.Shoot the Orange ribbon tails in Do-It tail mold 95017 at 330°F. Let them set fully, then demold them.
- 3.Place each finished tail into the matching cavity of Do-It worm mold 95221 and seat it fully with the joint straight.
- 4.Shoot the Black Blue Flake body at 330°F around the seated tails. Hold pressure briefly, cool, demold, and inspect the tail bond.
Keep each finished tail seated squarely in the full mold before injecting the body. Inspect the first pair for a straight joint, complete fill, and a sound bond. |